SC-TS01 not sending snmptraps

edited January 2011 in InfraSensing Sensors
Hi, the device is configured to allow snmp and set snmptraps. I can browse the device with a snmp browser, but it doesn't send traps, not even test ones. One thing I have noticed is that none of the snmp related settings show when browsing the device

SNMPv2-SMI::enterprises.17095.1.1.0 = STRING: "Temperature & SensorGateway"

SNMPv2-SMI::enterprises.17095.1.2.0 = STRING: "Release 1.0"

SNMPv2-SMI::enterprises.17095.1.3.0 = STRING: "Apr 2010"

SNMPv2-SMI::enterprises.17095.1.4.0 = STRING: "DataCentretemp"

SNMPv2-SMI::enterprises.17095.1.5.0 = STRING: "Data Centre"

SNMPv2-SMI::enterprises.17095.1.6.0 = IpAddress: x.x.x.x

SNMPv2-SMI::enterprises.17095.1.7.0 = IpAddress: x.x.x.x

SNMPv2-SMI::enterprises.17095.1.8.0 = IpAddress: x.x.x.x

SNMPv2-SMI::enterprises.17095.1.9.0 = IpAddress: x.x.x.x

SNMPv2-SMI::enterprises.17095. = INTEGER: 0

SNMPv2-SMI::enterprises.17095. = INTEGER: 1

SNMPv2-SMI::enterprises.17095. = IpAddress: x.x.x.x

SNMPv2-SMI::enterprises.17095. = Hex-STRING: 00

SNMPv2-SMI::enterprises.17095.3.1.0 = STRING: "Internal Temp"

SNMPv2-SMI::enterprises.17095.3.2.0 = STRING: "20.38"

SNMPv2-SMI::enterprises.17095.3.3.0 = STRING: "DOWN"

SNMPv2-SMI::enterprises.17095.3.4.0 = STRING: "27/01/2011, 11:54:12"

SNMPv2-SMI::enterprises.17095.3.5.0 = STRING: "External Temp"

SNMPv2-SMI::enterprises.17095.3.6.0 = STRING: "19.94"

SNMPv2-SMI::enterprises.17095.3.7.0 = STRING: "WARNING"

SNMPv2-SMI::enterprises.17095.3.8.0 = STRING: "28/01/2011, 10:10:51"

SNMPv2-SMI::enterprises.17095.3.9.0 = STRING: "External Humidity"

SNMPv2-SMI::enterprises.17095.3.10.0 = STRING: "58.18"

SNMPv2-SMI::enterprises.17095.3.11.0 = STRING: "WARNING"

SNMPv2-SMI::enterprises.17095.3.12.0 = STRING: "28/01/2011, 10:10:51"

SNMPv2-SMI::enterprises.17095. = No more variables left in this MIB View (It is past the end of the MIB tree)

The screenshots in the manual show the snmp settings, but we don't see them. Any ideas?




This discussion has been closed.