monitoring_thread2.exe runs with 100% CPU

Hello,

since the release 9.1.0 the prcess monitoring_thread2.exe runs with 100% CPU-Load and slow down the system.



Is there a problem with this release?



Thanks for your help.



pdsrow

The monitoring_thread hasn't changed in this release. Try to do a manual upgrade as per wiki and see if that helps. If you run an Antivirus software, then deactivate it and see if it helps

Hello,

the process run normal (30% CPU and 300MB Ram) after OS-Booting. After some minutes it use around 600MB and 100% CPU-Load.

Where is the log for this process? Maybe I can find there an error.



Thanks pdsrow

You will need to run it in debug mode.



Stop the monitoring service and then start from the command prompt the monitoring_watcher



monitoring_watcher.exe > debug.txt



At the time you see the spike check what it is checking - that might give an insight in what causes it too jump to 100%

I've solved the problem:

We changed the threads from 10 to 25.

Now the CPU runs with normal load.

We have over 200 Checks.



Thanks