Problem Accessing ssl.conf file

drstoutdrstout




I've recently upgraded my ServerCheck software in order to use https. I'm setting up my ServersCheck software to use https using the Servercheck Wiki procedure "Configuring Web Server in HTTPS Mode" at http://wiki.serverscheck.com/index.php/Configuring_Web_Server_in_HTTPS_Mode



There is a step where it requires that I get the ssl.conf file from the url http://files.serverscheck.net/conf/ssl.conf

I can't get to this link. I've tried at least 4 times and get a "connection time out" each time.



How do I get this file?

Comments

  • drstoutdrstout


    Thanks. Got the 3 byte file and put in conf directory. Then ran S-Server as per instructions Got a pop-up "The ordinal 132 could not be located in the dynamic link library SSLEAY32.DLL" followed by



    C:Program FilesServersCheck_Monitoring>s-server

    Can't load 'auto/Net/SSLeay/SSLeay.dll' for module Net::SSLeay: load_file:The specified module could not be found at /<C:Program

    FilesServersCheck_Monitorings-server.exe>DynaLoader.pm line 221.

    at perlapp line 848

    BEGIN failed--compilation aborted at /<C:Program FilesServersCheck_Monitorings-server.exe>Net/SMTP/TLS.pm line 89.

    BEGIN failed--compilation aborted at s-server.pl line 23.



    I'm using windows 32 bit version of OpenSSL version 1.0.1e 11 Feb 2013



    Please advise.
  • AdministratorAdministrator
    Scan your system for other SSLeay32.dll



    There must be others installed by other software and not in the application directory



    The error message is the result of a DLL conflict
  • drstoutdrstout


    Here's a list of the SSLeay32.dll files I found and Path settings





    C:>dir ssleay32.dll /s

    Volume in drive C has no label.

    Volume Serial Number is 1868-19AA



    Directory of C:OpenSSL-Win32



    02/11/2013 09:35 AM 269,824 ssleay32.dll

    1 File(s) 269,824 bytes



    Directory of C:OpenSSL-Win32bin



    02/11/2013 09:35 AM 269,824 ssleay32.dll

    1 File(s) 269,824 bytes



    Directory of C:Program FilesCAAccessControlbin



    05/26/2011 11:19 AM 212,992 ssleay32.dll

    1 File(s) 212,992 bytes



    Directory of C:Program FilesServersCheck_Monitoring



    06/30/2007 04:14 PM 200,704 ssleay32.dll

    1 File(s) 200,704 bytes



    Directory of C:Program FilesTrend MicroOfficeScan Client



    03/26/2009 10:24 PM 262,144 ssleay32.dll

    1 File(s) 262,144 bytes



    Directory of C:WINDOWSsystem32



    02/11/2013 09:35 AM 269,824 ssleay32.dll

    1 File(s) 269,824 bytes



    Total Files Listed:

    6 File(s) 1,485,312 bytes

    0 Dir(s) 33,843,150,848 bytes free





    C:>path

    PATH=C:Program FilesServersCheck_Monitoring;c:OpenSSL-Win32bin;C:Perlbin;C:PerlsitebinC:dcops;C:WINDOWSsystem32;C:WINDOWS;C:WINDOWSSystem32Wbem

    ;C:PROGRA~1COMMON~1System;"C:Program FilesGNUGnuPG";C:Program FilesManageSoftCommon;C:Program FilesCommon FilesSystem;C:Program FilesopenFTbin;C:

    Program FilesGNUGnuPGpub;C:Program FilesCAAccessControlBin
  • AdministratorAdministrator
    Could be the one from CA or Trend Micro - most likely the one in your system32 folder
  • drstoutdrstout


    OK. Should I delete those other ssleay32.dll files? Which is the correct one that I should be using, the one in:

    C:OpenSSL-Win32

    or C:Program FilesServersCheck_Monitoring?


  • AdministratorAdministrator
    You will need both:

    C:OpenSSL-Win32 and C:Program FilesServersCheck_Monitoring



    Removing the others may impact Trend Micro and CA software operation
  • drstoutdrstout


    Installed older version of OpenSSL (ver 0.9.8y) to get around dll problem and match dll in system32 directory.



    Now s-server starts suggesting that SSL server is running (see below), but can't get https (https://www.usmlva1001psrv.com:1272/) to work "IE can't display web page" if I move ssl.conf file out of directory it will work with http://www.usmlva1001psrv.com:1272 Any ideas on why https won't work?





    C:Documents and Settingsusername>s-server

    # Starting up app

    # Wed Mar 13 10:32:05 2013 file events.log cleaned

    # Wed Mar 13 10:32:05 2013 file master.log cleaned

    #

    # ServersCheck Web Server

    # Monitoring Appliance - BUSINESS 250 Edition

    # ServersCheck Appliance - BUSINESS 250 Edition - version 10.0.2

    #

    # Number of monitors allowed: 250

    #

    # Installed on 161.134.220.10 - USMLVA1001PSRV

    #

    # Loading language file: EN.lang

    # version 10.0.2

    #

    # ServersCheck MSP license loaded

    #

    # (c) Copyright 2003-2013 - ServersCheck BVBA

    # www.serverscheck.com

    #

    #

    #

    # Env:C:WINDOWS

    # Enabling HTTPS (SSL) Server

    #

    #

    # Start: Wed Mar 13 10:32:05 2013 - End: Wed Mar 13 10:32:06 2013

    #

    # Configuration server ready, serving on port "1272"...

    #

    #
  • AdministratorAdministrator
    Hello,



    Can you upgrade to the 10.1.x series and try this please?
This discussion has been closed.