snmpwalk fails - time out

kg4giykg4giy
edited December 2013 in InfraSensing Sensors
I have my gateway configured for SNMP and the iReasoning browser pulls back the MIBs successfully, but executing an snmpwalk - v2c public <ip addr> results in a timeout: No response from <ip addr>.



This makes it tough to use other SNMP devices if the basic snmpwalk fails.



Anyone else suffering through this? Any brilliant thoughts?

Comments

  • kg4giykg4giy
    Stupid firewalls....make sure ports 161 and 162 are open ....
This discussion has been closed.