If using the data modem option, then this also depends from mobile operator to mobile operator. Some support dial-in into a SMSC via land line, some don't.
DruDa
I get the always the following error message:
alert_sms.exe 01511165XXXX test /DEBUG
16.08.2006 07:27:18 License file is valid
16.08.2006 07:27:18 PROFESSIONAL VERSION - Registered to : serverscheck
16.08.2006 07:27:18 Sms Number : 01511165XXXX
16.08.2006 07:27:18 Sms Message : test - msg from ServersCheck
16.08.2006 07:27:18
16.08.2006 07:27:18 Using the following configuration settings:
16.08.2006 07:27:18 Protocol : UCP
16.08.2006 07:27:18 SmsCenterNumber : 001771167
16.08.2006 07:27:18 CommSettings : 8,n,1
16.08.2006 07:27:18 BaudRate : 9600
16.08.2006 07:27:18 TextLength : 160
16.08.2006 07:27:18 Port : AVMISDN5
16.08.2006 07:27:18 ConnectionTimeout : 60
16.08.2006 07:27:18
16.08.2006 07:27:18 Preparing UCP message.
16.08.2006 07:27:18 Initializing modem.
Error: [Unhandled][13] Type mismatch (in SmsCommand)
Administrator
Are you sure that your operator uses the SMSC protocol and not the TAP protocol?
For UCP messages see knowledge base article on tuning it.
Comments
Sending SMS alerts can be done in 3 ways as per help file
http://www.serverscheck.com/help6
If using the data modem option, then this also depends from mobile operator to mobile operator. Some support dial-in into a SMSC via land line, some don't.
alert_sms.exe 01511165XXXX test /DEBUG
16.08.2006 07:27:18 License file is valid
16.08.2006 07:27:18 PROFESSIONAL VERSION - Registered to : serverscheck
16.08.2006 07:27:18 Sms Number : 01511165XXXX
16.08.2006 07:27:18 Sms Message : test - msg from ServersCheck
16.08.2006 07:27:18
16.08.2006 07:27:18 Using the following configuration settings:
16.08.2006 07:27:18 Protocol : UCP
16.08.2006 07:27:18 SmsCenterNumber : 001771167
16.08.2006 07:27:18 CommSettings : 8,n,1
16.08.2006 07:27:18 BaudRate : 9600
16.08.2006 07:27:18 TextLength : 160
16.08.2006 07:27:18 Port : AVMISDN5
16.08.2006 07:27:18 ConnectionTimeout : 60
16.08.2006 07:27:18
16.08.2006 07:27:18 Preparing UCP message.
16.08.2006 07:27:18 Initializing modem.
Error: [Unhandled][13] Type mismatch (in SmsCommand)
For UCP messages see knowledge base article on tuning it.
http://kb.serverscheck.com/index.php?page=index_v2&id=20&c=6